Anatrendz
Office Heater Fan Heater Small Sun Electric Heater Power Saving
Regular price $45.50 Sale price $39.49
Shipping calculated at checkout.
SPECIFICATIONS
Brand: other/other
Model: FH-06A
Air heater/heater category: Fan heater
Power mode: DC
Applicable space: Office
Placement Method: Land
Maximum power of electric heater: 800W (inclusive)-849W (inclusive)
Voltage: 100-240V Neutral
Maximum heating area (square meters): 20 ㎡ and below
Additional features: None
Control mode: Mechanical
Gear: 2nd gear
Heating mode of heater: Aluminum sheet heat dissipation type
Whether timing function is supported: No
Net weight (including base): 1kg
Applicable area: 5-5 ㎡
Protection level: IPX3
Purchase place: Mainland China
Long power cord: 1
Dimensions: 48cm * 20cm * 38cm
Warranty Period: 1 year
1. Power supply AC220-240V,50Hz/60Hz
2. Turn on the machine, heat up, and rotate the fan, and work for 12 hours by default without pressing any buttons;
3. Press the time key to switch to the timing setting, old = press the "+-" Key to set the timing time; New = Press the time key to set the time, and then press the time key to switch back to the temperature setting;
4. The initial display temperature is 20 degrees Celsius, and the temperature setting is set by pressing the up and down keys, ranging from 15 to 32 degrees Celsius; The time setting is set to 1 to 12 hours;
5. Press the fan key to switch the high (HH) low (LL) two-speed fan speed;
6. Reach the set temperature, cut off the heating, stop after the fan continues to work for 60 seconds, the screen displays OF, lower than the set temperature-1, re-heating;
7. Arrive at the scheduled time (if not set, the default is 12 hours). Cut off the heating and stop after the fan continues to work for 60 seconds. The screen displays;
8. After finishing the work, press any key to restart the work (if no timing is set, the default is 12 hours)
9. If there is a "natural wind" function, press and hold the "+-" button for three seconds to start, and then display CC; Continue to press and hold the "+-" button for three seconds to close, and display the setting before the "natural wind" starts.
2. Turn on the machine, heat up, and rotate the fan, and work for 12 hours by default without pressing any buttons;
3. Press the time key to switch to the timing setting, old = press the "+-" Key to set the timing time; New = Press the time key to set the time, and then press the time key to switch back to the temperature setting;
4. The initial display temperature is 20 degrees Celsius, and the temperature setting is set by pressing the up and down keys, ranging from 15 to 32 degrees Celsius; The time setting is set to 1 to 12 hours;
5. Press the fan key to switch the high (HH) low (LL) two-speed fan speed;
6. Reach the set temperature, cut off the heating, stop after the fan continues to work for 60 seconds, the screen displays OF, lower than the set temperature-1, re-heating;
7. Arrive at the scheduled time (if not set, the default is 12 hours). Cut off the heating and stop after the fan continues to work for 60 seconds. The screen displays;
8. After finishing the work, press any key to restart the work (if no timing is set, the default is 12 hours)
9. If there is a "natural wind" function, press and hold the "+-" button for three seconds to start, and then display CC; Continue to press and hold the "+-" button for three seconds to close, and display the setting before the "natural wind" starts.
